Removing The Instrument Cover; Refitting The Instrument Cover; Rear Panel View Showing Cover Fixing Screws - HP 8114A Service Manual

Removing the Instrument Cover

Refitting the Instrument Cover

Figure 4-3 for the position of the feet.
2. Remove the carrying handles from the case by removing 2 screws
from each side of the case. Both sides have the same fixings.
Figure 4-2. Removing the Carrying Handles
3. Remove the two screws securing the cover to the chassis,
Figure 4-3 shows their position.
Figure 4-3. Rear Panel View Showing Cover Fixing Screws
4. Slide the cover about 10 mm back from the front panel.
chassis, and lifting the cover up.
1. Refitting the instrument cover is the reverse procedure of removal.
COVER FIXING SCREWS
Disassembly and Reassembly 4.5