Test 9: Pulse Aberration Test
Test Specifications
Equipment Needed
Procedure
'The following tests arc required:
1) Overshoot and Ringing
2) Preshoot
Overshoot/Ringing/Preshoot:
Digitizing Oscilloscope with Accessories
High Power Attenuator
1. Connect HP 8114A to the Scope as shown:
HP 8! ' 4A UNDER TEST
Connecting HP 8114A to the Scope
On the HP 8114A press TRIGGER and set up page as follows:
n il:~:ii$- I W:IIJ;
n si!-,sgi;j plJlscs
following illustration:
Dut yCyc 50.0 %
into 50.0 R -JX.
HP 5412 IT FRONT-END
Inh OFF f
Configuring the Output Page
Testing the HP 8114A