Test 3: Delay - HP 8114A Service Manual

Test 3: Delay

Test Specifications Range
Equipment Needed
Procedure
Testing the HP 8114A
Fixed: typical 42.0 ns
Variable: 0.00 ns to 999 ms
Resolution 3 digits, best case 10 ps
Accuracy
0.03% + 26
RMS-Jitter
Digitzing Oscilloscope with Accessories
Pulse Generator
Counter
Cable, 50 52, coaxial, BNC
1. Connect HP 8114A to the Scope as shown:
Connecting HP 8114A to the Scope
2. Set the Pulse Generator to:
Period
Width 100 ns
Amplitude 1 V
Offset
output Enable
3. Select the TRIGGER page on the HP 8114A and set up as follows:
ps (0.05% +25 ps for 50 ns <delay <IO0
The TRIGGER Page Set-up
WITH SMA/BNC
A D A P T O R