Location Of The Power Load Resistor And Power Fet - HP 8114A Service Manual

OUTPUT
B O A R D
66506
P O W E R FFT -3
Figure 4-12. Location of
11. Remove the 2 screws securing the power load resistor R601 to the
chassis. The power load resistor is located close to one hybrid
stage. See Figure 4-12.
12. Remove the 7 screws securing the output board to the chassis.
See Figure 4- 11.
13. Lift the output board up at the fan at the front panel side, and
pull it out towards the front panel side.
9
8
the
Power Load Resistor and Power FET
P O W E R L O A D
RESISTOR
Disassembly and Reassembly 4-15