Operation
6.2 Operating controls
The compact controller is operated using the operating keys on the front.
Operating keys
The function of the keys varies depending on the level/menu which is active.
Key
Selector key (yellow)
Selector key
Manual/automatic
key
Cursor keys
Escape key
No keys pressed
6-2
Operating level
− Open configuration level.
− Activate set point.
1)
Only when the set point name (W, W2 or WE)
1)
blinks on the display
− Switch between readings:
W Internal set point 1,
W2
Internal set point 2
1)
WE
External set point,
1)
Y Manipulated variable,
Xd% Error
Only when they have been configured (see the
1)
'Start-up and configuration on the device' sec-
tion).
− Switch between manual and automatic
mode.
1)
In manual mode, the
1)
display.
− Change the value of internal set point.
− Change the control output.
Only when selected using the selector key.
1)
Only when Y has been selected using the selec-
2)
tor key or when manual mode (
selected.
− Display current set point.
The display changes back to the currently
valid set point.
Exceptions:
In manual mode and when the manipulated
variable is displayed
icon appears in the
1)
2)
) has been
Configuration level
− Open menus, functions
and parameters.
− Confirm settings.
− Open parameter level.
− Jump within the value
range of an open parame-
ter.
− Shift the decimal point one
place to the right.
No function
− Select menus, functions
and parameters.
− Set parameters and func-
tions.
− Return to the operating
level stepwise.
The controller returns to the
operating level after approxi-
mately five minutes.
EB 6493 EN