Operating Controls - Samson TROVIS 5578-E Translation Of Original Instructions

Operating controls

4 Operating controls
The heating controller is operated on site using the operating controls on the front. They are
located in the front panel of the controller.
Rotary pushbutton
*
Rotary switch
The rotary switch is used to set the operating mode and the relevant parameters for each
control circuit.
8
Turn [q]:
Select readings, parameters and function blocks
Press [Û]:
Confirm adjusted selection or settings
Operating level
Operating modes
Manual level
Day set point (rated room temperature)
Night set point (reduced room temperature)
Times-of-use for heating/DHW
Special time-of-use
Time/date
Settings
KA 5578-E EN