6 Operation
6.1 Device overview and operating controls
Handsteller
Fig. 6-1: Location of operating elements
6.2 Indication with LEDs
The electric actuator with process controller
has a red and a yellow LED which indicate
the operating state of the actuator. The LEDs
are located underneath the transparent cover
on top of the actuator (see Fig. 6-1).
Î See the 'Operation' section for the blink-
ing pattern.
EB 5757 EN
Hubanzeige
Cover
6.3 Serial interface
The serial interface (RJ12 jack) is used for
communication with the actuator. Push the
cover to access it (see Fig. 6-1).
LEDs
Serial interface
Operation
Manual
adjuster
6-1