Switching Over To Manual Mode And Changing The Manipulated Variable; Aux Menu, -Co- St.in: Reset To Default Settings - Samson TROVIS 6493 Mounting And Operating Instructions

9.3 Switching over to manual mode and changing the manipu-
lated variable
Î Switch to manual mode.
The icon and the manipulated variable Y are shown on the display.
Î Raise the set point.
Î Lower the set point.
Return to automatic mode.
Î Change to automatic mode.
The hand icon is no longer displayed. The current set point is shown.
Note
Press key to read the manipulated variable Y.
9.4 AUX menu, -CO- ST.IN: Reset to default settings
Î See Configuration Manual u KH 6493.
The Reset to default settings function in the AUX menu causes all parameters, functions and
calibration data to be reset. After the reset, the message FrEE INIT appears on the display.
-CO- ST.IN
FrEE INIT
AII INIT
FUnC INIT
PArA INIT
AdJ INIT
EB 6493 EN
Reset to default settings
OFF
All functions, parameters and code number
All functions
All parameters and code number
Calibration values for IN1, IN2, Y
Operation
9-3