Samson TROVIS 6493 Mounting And Operating Instructions page 8

Safety instructions and measures
Personal protective equipment
No personal protective equipment is required for the direct handling of the controller.
Revisions and other modifications
Revisions, conversions or other modifications of the product are not authorized by SAMSON.
They are performed at the user's own risk and may lead to safety hazards, for example. Fur-
thermore, the product may no longer meet the requirements for its intended use.
Warning against residual hazards
The controller has a direct effect on the final control element. To avoid personal injury or
property damage, plant operators and operating personnel must prevent hazards that could
be caused in the control valve by the process medium, the operating pressure, the signal
pressure or by moving parts by taking appropriate precautions. Plant operators and operat-
ing personnel must observe all hazard statements, warning and caution notes in the refer-
enced documents.
Responsibilities of the operator
Operators are responsible for proper use and compliance with the safety regulations. Opera-
tors are obliged to provide these mounting and operating instructions as well as the refer-
enced documents to the operating personnel and to instruct them in proper operation. Fur-
thermore, operators must ensure that operating personnel or third parties are not exposed to
any danger.
Responsibilities of operating personnel
Operating personnel must read and understand these mounting and operating instructions as
well as the referenced documents and observe the specified hazard statements, warnings
and caution notes. Furthermore, operating personnel must be familiar with the applicable
health, safety and accident prevention regulations and comply with them.
1-2 EB 6493 EN