Usb Connection For Music Playback; Wireless Streaming - Alpine PDP-E802DSP Manual

USB CONNECTION FOR
MUSIC PLAYBACK
The PDP‑E802DSP can act like an external sound
card when connected to a PC or smartphone by
USB.
Minimum requirements:
‑ iOS 11
‑ Android 7.0
‑ Windows 10
PC Connection
Connect a Windows PC to the PDP‑E802DSP's
Micro USB port labeled 'PC' .
USB RC WIFI
OPT IN
PROT
STAT
PC
LINK
iPhone Connection
Connect an Apple device via Apple´s camera
connection kit to the PDP‑E802DSP's Micro USB
port labeled 'PC' .
USB RC
OPT IN
PROT
STAT
PC
LINK
Android Connection
Connect an Android device via OTG kit to the
PDP‑E802DSP's Micro USB port labeled 'PC' . Host
mode must be supported by the phone.
USB RC
OPT IN
PROT
STAT
PC
LINK
In all cases above, the source of the
PDP‑E802DSP needs to be set to USB using the
ALPINE Sound Lab or the ALPINE Remote app.
WIFI
WIFI

WIRELESS STREAMING

• Audio streaming from iOS using Airplay. *
• Audio streaming from Android devices using
casting apps that support UPnP/DLNA. *
* Hi‑Resolution audio streaming apps required for
24‑bit/92kHz audio files.
Wireless streaming with iOS
1. Connect your iOS device with the PDP‑E802DSP
amplifier as described in "ALPINE REMOTE
CONTROL APP FOR PDP‑E802DSP" on page
26.
2. Select Streaming as source within the remote
app or PC software
3. Start Apple Airplay and select „PDP‑E802DSP " as
destination
4. Start playback
Wireless streaming with Android Devices
1. Start a wireless connection from your Android
device to the PDP‑E802DSP amp as described in
"ALPINE REMOTE CONTROL APP FOR
PDP‑E802DSP" on page 26.
2. Select Streaming as source within the remote
app or PC software
3. Start your DLNA streaming app on your device
and select „PDP‑E802DSP" as destination.
4. Start playback within the streaming app.
Procedure and settings may differ depending on
device and Android version.
27
-EN