Pc Connection - Alpine PDP-E802DSP Manual

PC CONNECTION

Minimum system requirements:
• Windows 10
32 and 64bit systems are supported
• 1,2Ghz; 1GB of RAM; 1GB of HDD space
• Latest .NET Framework (v 4.7.1 or higher)
• Minimum Display resolution: 1280x800
Software Installation:
You can download the Alpine Sound Lab for
PDP‑E802DSP software and the device driver
from your local Alpine website. The file can be
found in the support section.
The website will also contain short video clips
explaining the process step‑by‑step.
• Download the installation files
• Unpack the zip file
• Run the setup wizard
Screenshots from Windows Installation Process:
1
2
3
4
5
Caution:
It is highly recommended to set the volume of
your car source to minimum position during the
first start‑up. Additionally, no devices or
speakers should be connected to the amplifier
until general settings in the Alpine Sound Lab
for PDP‑E802DSP software have been made.
Especially when the PDP‑E802DSP is used to
drive a fully active speaker system. Wrong
settings can destroy your tweeters right away.
15
-EN