Alpine Remote Control App For Pdp-E802Dsp - Alpine PDP-E802DSP Manual

ALPINE REMOTE CONTROL APP FOR PDP-E802DSP

In order to enhance the user experience of the
PDP‑E802DSP, we offer smartphone apps for IOS
and Android. The apps allow adjustments for
volume, subwoofer level, source, mute and preset
selection of the PDP‑E802DSP. The selection of day
and night theme is also possible. Status information
will be shown in real time.
Minimum requirements:
‑ iOS 11
‑ Android 7.0
Remote Control App Download:
Locate the Alpine Remote Control App for
PDP‑E802DSP in the respective app store. The
apps are free of charge. Download and install to
your device.
Wireless Connection:
When connecting via the wireless module, a
connection to this module must be established
via the Wi‑Fi settings of your smart device or PC.
Activate the Wi‑Fi network search on your smart
device or PC and search for the SSID
"PDP‑E802DSP". The default password to the
network is "alpineE800".
This connection process may take 30‑90 seconds
before the (PDP‑E802DSP) appears.
26
-EN
When a wireless connection has been established
the wireless logo on the main configuration screen
of PC software and remote app will change from
gray to blue.
To initiate communication between the ALPINE
Sound Lab or the ALPINE Remote app, push the
power button in the app.
When the connection between app and amplifier is
initiated, a pop‑up message will be shown. Once it
is confirmed, the connection will be established.
The ALPINE Remote App will also work in landscape
mode.