Connection And Temperature Display; Connection Settings; Temperature Display; File Settings - Alpine HDP-D90 Owner's Manual

⑦ Function page selection.
⑧ Editing area of function page

Connection and Temperature Display

Setting items:
Connection and temperature display
Setting content:
Connection/disconnected/temperature
display

Connection Settings

1
Connect the USB cable and open the
software, it will automatically go online.
After the connection is successful, the
connection icon will show green [
2
After online, click the connection icon to
disconnect. When not online, the connection
icon will display red [
connection icon again to go online again.

Temperature Display

Detect the temperature on the surface of the
machine and display the current temperature
value.

File Settings

Click [File] to enter the loading or saving scene
file page.
 Load or save presets file page
Setting items:File
Setting content:Load PC Preset/Save as PC
Preset/Load All Presets/Save All Presets
Load PC Preset
The scene file previously saved on the
9 EN
]。
], and click the
computer can be loaded as the current
machine working scene.
Save as PC Preset
The current machine work scene file can be
saved to the computer for later recall.
Load All Presets
Load the files of the entire machine previously
saved on the computer to the machine
(including the current working scene, machine
preset scene, output channel configuration
data, etc.), and copy all the machine data that
has been debugged to the currently connected
machine.
Save All Presets
Save all data on the current online machine as
a computer file (including the current working
scene, machine preset scene, output channel
configuration data, etc.) for later recall when
the whole machine is copied.

Option Setting

Click [Option] to enter the setting page.
 Setting page
<Setting item>
Signal generator
Signal selection
Volume
Sine wave frequency
Output signal selection
Input link settings
Output link settings
Built-in AMP
Firmware update