FIRMWARE UPDATE
Firmware update procedure
1. Download the latest Firmware file from your
local Alpine homepage.
2. Check the support area. For latest software.
3. Extract the firmware file.
4. Disconnect the power connector.
5. Connect the DSP‑E802DSP to your computer
(with supplied micro USB cable).
6. The amp will be recognized as disk drive.
7. Delete the old file. The firmware file has always
the same name 'software.apn' . No version
number is shown.
8. Drag and drop the new Firmware file to the
ALPINE AMP folder.
9. Reconnect power.
10. With the next amp start the new firmware will
be loaded. It will automatically be renamed to
„software.apn".
37
-EN