Accessing The Menus - Canon FAXPHONE L80 Basic Manual

Accessing the Menus

Follow this procedure to access the different menus:
1
Press Function.
2
Press Data Registration.
3
Press Set.
4
Use ∂ or ¨ to select the menu you
want.
• You can select from the following:
– USER SETTINGS (1 p. 10-4)
– REPORT SETTINGS (1 p. 10-5)
– TX SETTINGS (1 p. 10-6)
– RX SETTINGS (1 p. 10-7)
– PRINTER SETTINGS (1 p. 10-8)
– POLLING BOX (1 p. 10-9)
– SYSTEM SETTINGS (1 p. 10-10)
5
Press Set to access the settings under
the menu you selected.
6
Refer to the appropriate table
(1 following pages) and use these
guidelines to select and register
settings:
Use ∂ or ¨ to scroll through the
settings.
To register a setting or access sub-
settings, press Set.
To return to a previous level, press
Function then Data Registration.
• For your settings to be registered, be
sure to press Set after making a
selection or entering information.
• If at any stage you wish to return to
standby mode, press Stop/Reset.
• If you pause for more than 60 seconds
while accessing a menu, the machine
will automatically return to standby
mode.
7
When you are finished, press Stop/Reset
to return to standby mode.
Chapter 10
DATA REGSTRATION
USER SETTINGS
ECM RX
12/26 FaxTel
Summary of Settings
10-3