Separate Holding Of Two Calls; Put A Conference On Hold - Nortel Business Communications Manager 2.5 Programming Manual

46 Chapter 3 Make a call
On a T7208, T7310, T7316 or M7324(N) telephone:
1
Press the line button of the call that you want to disconnect. The second call is automatically
put on hold.
Press ® to disconnect the first call.
2
3 Press the button of the held line to reconnect with the second call.
On a T7100 telephone:
Press ≤£‹ to put the first call on hold.
1
Press ≥ to put the second call on hold.
2
Press ® to disconnect the second call.
3
Press ≥ to reconnect with the first call.
4
or
Press ≤£‹and then press ≥ to put the second call on hold.
1
Press ® to disconnect the first call.
2
Press ≥ to reconnect with the second call.
3

Separate holding of two calls

For all system telephones except the T7100 telephone, you can place the two people in a
conference call on hold separately, so that they cannot talk to each other.
1 Press the line button of one call. The other call is automatically put on hold.
Press ≥. The second call is put on hold.
2
Now you can re-establish the conference.
3
Take one call off hold.
Press ≤‹.
4
5
Take the remaining call off hold.

Put a conference on hold

You can put a conference on hold, allowing the other two people to continue speaking to each other
by pressing ≥.
You can rejoin the conference by pressing either of the held line buttons.
For the T7100 telephone, press ≥.
P0937240 02