Table of Contents
Advertisement
Chapter 3
Make a call
The following are different ways to make a call, depending on the programming and the type of
call:
•
Pick up the handset and dial. Business Communications Manager supports three methods of
dialing. See
•
Pick up the handset, press a line button, and dial (if the call is not on your prime line).
Press ≈ and dial (to talk without using the handset). See
•
•
Press a line or intercom button, then press the handsfree button and dial (to talk without the
handset. The speaker is active and the microphone is muted until you select the handsfree
button or pick up the handset).
•
Press a line or intercom button and dial (to talk without the handset and if Automatic
Handsfree is programmed on your telephone).
•
Use one of the features that make dialing easier. See
page
49.
221 busy
PRIORITY
9__
QUIT
BKSP
95551234
TRANSFR
Already joined
Calling 221
PRIORITY
Can't ring again
Do not disturb
PRIORITY
"Select how you dial your calls" on page
The telephone you have called has no internal lines available.
LATER
Press
to use the Ring Again or Message features or press
LATER
PRIORITY
to make a priority call.
You are dialing using Pre-dial. To erase an incorrect digit, press
the left end of √ or
complete, select a line or lift the handset.
This prompt remains on your display while you are on a call you
have dialed. To transfer the call, press
Your telephone is connected to the telephone you are trying to
call. Check your active line buttons, and return to that call.
Wait for the telephone to be answered. If no one answers, press
LATER
to use the Ring Again feature
LATER
or Message feature
to make a priority call.
You cannot use Ring Again on your current call. You can use
Ring Again while you have a busy signal on an internal call or
line pool request or while an internal call is ringing.
The telephone you are calling has Do Not Disturb turned on.
LATER
Press
to use the Ring Again or Messages features, or press
LATER
PRIORITY
to make a priority call.
42.
"Handsfree and Mute" on page
Chapter 4, "Time-saving features," on
BKSP
. When the number is
TRANSFR
("Ring Again" on page
("Messages" on page
71), or press
Telephone Features Programming Guide
.
44)
PRIORITY
39
97.
Advertisement
Table of Contents
