Change Your Call Log Password; Delete An Assigned Password; Program A Telephone To Log Calls Automatically - Nortel Business Communications Manager 2.5 Programming Manual

80 Chapter 8 Track your incoming calls
If you do not remember your Call Log password, programming from Unified Manager can delete
the password. For more information about programming using Unified Manager, see the Business
Communications Manager Programming Operations Guide.

Change your Call Log password

Press ≤
1
2 Enter your old password. The display shows
3 Enter your new four-digit password. The display shows
4 Re-enter your password. The display shows

Delete an assigned password

Press ≤
1
2 Enter your old password. The display shows
Press ≥ or
3

Program a telephone to log calls automatically

Your installer can program each telephone to automatically log calls coming in on a line.
1:Unknown name
1:Unknown number
12:KATE SMITH
NEXT ERASE
12øKATE SMITH
NEXT ERASE
12¤KATE SMITH
NEXT ERASE
49/1234567890123
NEXT ERASE
Call(s) bumped
P0937240 02
¥¡Þ
. The display shows
¥¡Þ
. The display shows
OK
. The display shows
The caller's name is not available.
The caller's number is not available.
_ indicates a new item.
MORE
ø
indicates that the call was answered.
MORE
¤
indicates a long distance call.
MORE
/
indicates the stored number was trimmed to its final 11 digits.
Ã
Press
MORE
the call.
One or more log entries are deleted by the Autobumping feature
while you are viewing at the Call Log.
Old passwrd:
.
New passwrd:
.
Repeat New:
Password changed
Old passwrd:
.
New passwrd:
.
No pswd assigned
, to confirm the change.
MORE
or to show additional information about
.
to confirm the change.