System Reset Features (Addr 4090-4093) - NAPCO GEMINI GEM-P3200 Programming Instructions Manual

WI818B 5/99
GEM-RP1CAe2 Keypad
GEM-RP2ASe2 Keypad
GEM-RP1CAe2 Keypad
GEM-RP2ASe2 Keypad
GEM-RP1CAe2 Keypad
GEM-RP2ASe2 Keypad
NAPCO Security Systems
Easy Setup for RF Only Systems
Automatically removes all EZMs programmed in the Easy
Menu Program Mode. (This must be the last step in the pro-
gramming menu.)
Access address 4090, then press the
Clear Dealer Program (Erases Dealer Program)
This erases the dealer program . Use this feature to start a
customized default program.
Access address 4091, then press the
NOTE: Enter Easy Menu Driven Program Mode to program system again.
Cold Start (Erases Entire Program)
This erases the entire program (codes, schedules, etc),
leaving the panel as it came right out of the box.
Access address 4093, then press the
NOTE: Some features (schedules) can only be programmed again with the
Downloading Software.
button. Data entry is not allowed.
button. Data entry is not allowed.
button. Data entry is not allowed.
GEM-P3200 Programming Instructions
Page 43