Cs Reporting Codes (Addr 0870-0904) - NAPCO GEMINI GEM-P3200 Programming Instructions Manual

Page 28
ADDRESS
SYSTEM
0870-0880
REPORTING CODES
LEFT ADDR
Test Timer
0870
Alarm Supervisory
0871
Bus Failure
0872
Memory Failure
0873
Panel Low Battery
0874
Panel AC Failure
0875
EZM Tamper
0876
Sensor Watch
0877
RESERVED
blank (•) 0878
RESERVED
blank (•) 0879
Telco Line Failure
0880
CS REPORTING
1. Enter in corresponding address location (left and right digits).
2. Valid entries are: 1-9, 0 and B-F.
3. To disable a code leave boxes blank (•).
NOTE: Dark shaded data value box shows option not available.
CAUTION: For all 2-Digit Reporting Formats (see CS Receiver Format Options), use the following:
Example: The 2-digit reporting code as shown is "21".
LEFT DATA
AREA
VALUES
)
(CIRCLE
AREA 1
1
AREA 2
2
RESERVED
4
RESERVED
8
CS SYSTEM REPORT OPTIONS
Cancel Next Test Timer on any Report
Disable Wait for Silence
Disable Wait for Handshake
Handshake for Local Telemetry
CS AREA & SYSTEM REPORTING OPTIONS:
1. Select the desired option by circling
right).
2. Add the data values (ex: 15=1+2+4+8) from the selected options.
3. Enter in address location (left and right digits).
NOTE: Dark shaded data value box shows option not available.
GEM-P3200 Programming Instructions
SYSTEM
REPORTING CODES
RIGHT
Digital Dialer Test
RESERVED
RESERVED
Service Message
Program Change
RF Receiver Trouble
RF Receiver Tamper
RF Trouble
[Default = blank (•) blank (•) from address 0870-0904]
blank (•)
blank (•)
CODES:
Reporting
Code
2nd Digit of Reporting Code
DISABLE OPENING REPORTS
ADDRESS 1024
LEFT DIGIT (SUM RIGHT DIGIT
OF DATA VALUES)
blank (•)
[Default = blank (•) blank (•)]
LEFT DATA
VALUES
) LEFT DIGIT (SUM
(CIRCLE
OF DATA VALUES)
1
2
4
[Default = blank (•) blank (•)]
8
the data values for each digit (left and
ADDRESS
0890-0897
LEFT ADDR RIGHT
0890
blank (•) 0891 blank (•)
blank (•) 0892 blank (•)
0893
0894
0895
0896
0897
ADDRESS LOC.
LEFT RIGHT
1 2
1st Digit of Reporting Code
LEFT DATA
AREA
VALUES
(CIRCLE
AREA 1
1
AREA 2
2
RESERVED
4
RESERVED
8
ADDRESS 1027
RIGHT DIGIT (SUM
OF DATA VALUES)
ADDRESS
KEYPAD
0900-0904
REPORTING CODES
LEFT
Ambush
Panic
Fire
Auxiliary
Tamper
DISABLE CLOSING REPORTS
)
ADDRESS 1025
LEFT DIGIT (SUM
OF DATA VALUES)
[Default = blank (•) blank (•)]
RIGHT DATA
VALUES CS SYSTEM REPORT OPTIONS
)
(CIRCLE
1 Backup Report on Telco 2
2 Touchtone Dialing Only *
4 Touchtone Dialing w/Rotary Backup *
Transmit "402" Opening/Closing Code
8
* NOTE: If neither Touchtone Dialing nor Touch-
tone w/Rotary Backup is selected, then system
defaults automatically to Rotary Dialing. Leave
blank (•) to select Rotary Dialing.
NAPCO Security Systems
WI818B 5/99
ADDR RIGHT
0900
0901
0902
0903
0904
RIGHT DIGIT
blank (•)