Table of Contents
Advertisement
Page 24
CS SYS TEM RE P ORTIN G OPT ION S (ADDRES S 0670-0705)
ADDRESS 0670-0682
CS SYSTEM
Alarm Restore
blank (•)
Trouble
blank (•)
Trouble Restore
blank (•)
Xmitter Low Battery
blank (•)
Xmitter Supervision
blank (•)
Xmitter Tamper
blank (•)
RESERVED
blank (•)
Opening
blank (•)
Closing
blank (•)
Opening after Alarm
blank (•)
Conditional Close
blank (•)
Cancel
blank (•)
Test Timer
[Default = blank (•) blank (•) from address 0670-0682]
[Default = blank (•) blank (•) from address 0683-0705]
CS AREA & SYS TEM RE POR TIN G OP TION S (ADD RESS 078 5, 07 86 & 0 788 )
DISABLE OPENING REPORTS
ADDRESS 0785
LEFT DIGIT
RIGHT DIGIT (SUM
OF DATA VALUES)
blank (•)
[Default = blank (•) blank (•)]
OPENING REPORT OPTIONS:
1. Select the desired option by circling the data values for each digit (left and right).
2. Add the data values (ex: F=15=(1+2+4+8) from the selected options. See page 13).
3. Enter in address location (left and right digits).
NOTE: Dark shaded data value box shows option not available. Press
CS System Report Options
0788
Option
Default
OFF
1
2
OFF
OFF
3
Touch-tone Dialing w/Rotary Backup *
4
OFF
OFF
5
Cancel Next Test Timer on any Report
OFF
6
Disable Wait for Silence (Pager Format)
OFF
7
Disable Wait for Handshake on Transmit
OFF
8
Freedom F-64 Programming Instructions
CS SYSTEM
ADDR
0670
Telco Fail
0671
RF Rec. Trouble
0672
Memory Fail
0673
Low Battery
0674
Panel AC Fail
0675
EZM Tamper
0676
blank (•)
Alarm Output Superv.
0677
Ambush
0678
Panic
0679
Fire
0680
Auxiliary *
0681
Tamper
0682
Fail to Open
Fail to Close
Keyfob Low Battery
RIGHT DATA
VALUES
AREA
(CIRCLE ALL
)
THAT APPLY
AREA 1
1
AREA 2
2
AREA 3
4
AREA 4
8
Backup Report on Telco 1 & 2
Touch-tone Dialing Only *
RESERVED
Disable Auto Dial Tone Detect
ADDRESS 0683-0708
CS SYSTEM REPORTING CODES:
1. Enter in corresponding address loca-
ADDR
0683
0684
0685
0686
0687
2. Valid entries are: 1-9, 0 and B-F.
0688
0689
3. To disable a code leave boxes blank
0698
0699
0700
0701
0702
4. Press
0703
0704
* NOTE: Keypad Aux. is not to be selected for
0705
DISABLE CLOSING REPORTS
ADDRESS 0786
LEFT DIGIT
RIGHT DIGIT (SUM
OF DATA VALUES)
blank (•)
[Default = blank (•) blank (•)]
U
to save.
CS SYSTEM REPORTING OPTIONS:
1.
Select the desired option entering the
option number (1-8) for each digit.
2.
Enter corresponding option number in
address location.
NOTE: Dark shaded data value box shows op-
tion not available.
U
3.
Press
to save.
* NOTE: If neither Touch-tone Dialing nor Touch-tone w/Rotary
Backup is selected, then system defaults automatically to Rotary
Dialing. Leave blank (•) to select Rotary Dialing.
L
WI1502A 9/06
tion (left and right digits).
NOTE: Left digit is the first digit and
right digit is the second digit in a two
digit CS receiver format.
NOTE: A is not permitted.
(•).
NOTE: Dark shaded data value box
shows option not available.
U
to save.
UL Installations.
RIGHT DATA
VALUES
(CIRCLE ALL
)
THAT APPLY
1
2
4
8
NAPCO Security Systems
AREA
AREA 1
AREA 2
AREA 3
AREA 4
Advertisement
Table of Contents
