General Tightening Torque; Instructions For Use - Stiga Park Series Workshop Manual

Edition Manual
2014-09-22 Workshop Manual, GGP Park 1 General instructions

1.6.2 General tightening torque

Unless otherwise stated, the following
tightening torque are applicable for screws and
nuts on the machine:
Tightening torques
Thread Torque
M5 5,7 Nm
M6 9,8 Nm
M8 24 Nm
M10 47 Nm

1.7 Instructions for use

Some procedures, e.g. changing engine oil,
engine filter etc., are refered to the owner´s
manual, delivered with the actual machine.
The owner´s manual can also be downloaded
from GGP´s homepage. Go to www.GGP.com
and click further to your actual language and
heading.
Chapter Page
31