Stiga Park Series Workshop Manual page 76

Edition Manual
2014-03-31 Workshop Manual, GGP Park 5 Belts
5.2 Replacements
When replacement belts, respective when the
fitting is complete, the following measures shall
be considered if applicable:
Warning!
Be carefully not to damage the
plastic fan. Damage results in
insufficient cooling of the HST.
Warning!
.Do not bend the lever when
loosening or tightening lever
mounted pulley nuts.
Assemble tension pulleys with the flange
upwards.
When applicable, make adjustments below.
See instructions in the actual section.
• Brake and clutch.
• Power take-off brake and the work equipment
lever.
Magnetic clutch
The tightening torque for the magnetic clutch
screw is 50 Nm.
Chapter Page
4