Stiga Park Series Workshop Manual page 82

Edition Manual
2014-09-09 Workshop Manual, GGP Park 6 Control wires
5. Fit the wire in the front attachment. Check
that the slot on the control wire coincides
with the bulge in the cap. If these parts are
fitted incorrectly it will be
difficult to adjust the control wire since the
wire will slide in the attachment.
6. Thread the stop nuts on both ends of the
control wire and fit the elbow link bodies.
See "Elbow links" at page 3.
Note!
Refit all cable holders.
Follow-up work
Adjustment of control wire as
described below.
Chapter Page
6