Stiga Park Series Workshop Manual page 84

Edition Manual
2014-09-09 Workshop Manual, GGP Park 6 Control wires
3. Press the pedal forwards as far as possi-
ble. Screw up the stop screw so that it
touches the pedal.
4. Release the pedal and then screw up the
stop screw a further ½ - 1 turn.
Tighten the stop nut.
Note!
The movement of the pedal must
always be limited by the stop screw, to
avoid overloading the control wire.
Follow-up work:
Test driving.
Chapter Page
8