Edition
Manual
2014-09-09 Workshop Manual, GGP Park 6 Control wires
6.6.3 Adjustment of PTO wire and
brake
This procedure is valid for machines with the
brake mechanically linked to the tension pulley
only.
The wire tension and the brake are working to-
gether.
Adjusting influences both the power take-off
engagement and the power take-off brake, and
must always be conducted thoroughly.
Warning!
The power take-off brake is part of the
machine's safety system. It is there-
fore especially important that it is
checked and adjusted correctly.
Procedure
1. Disengage the power take-off.
2. Disconnect the brake rod from the brake shoe
arm.
Chapter
Page
18