Working Basis; Order Of The Adjustments; Laying The Cable Guide - Dürkopp Adler 52 i Series Service Instructions Manual

Working basis

3

3.1 Order of the adjustments

Order
The setting positions for the machine are interdependent.
Always comply with the order of individual adjustment steps as specified.
It is absolutely essential that you follow all notices regarding prerequisites
and subsequent settings that are marked with

3.2 Laying the cable guide

Ensure that all cables are laid in the machine such that the function of
moving parts is not hampered.
To lay the cable guide:
1. Lay any excess cable neatly in proper cable snakes.
2. Bind together the cable loops with cable ties.
Important
Tie loops wherever possible to fixed parts.
The cables must be secured firmly.
3. Cut off any overlapping cable ties.
Service Instructions 52Xi, 52Xi-75 - 00.0 - 11/2021
Working basis
NOTICE
Property damage may occur!
Risk of machine damage from incorrect order.
It is essential to follow the working order specified in these
instructions.
NOTICE
Property damage may occur!
Excess cable can impair the functioning of moving machine parts.
This impairs the sewing function and can result in damage.
Lay excess cable as described above.
in the margin.
11