Table of Contents
Advertisement
182
7.6
To adjust the working height:
WARNING
Risk of injury from moving parts!
The tabletop can sink under its own weight when
the screws on the stand bars are loosened.
Crushing possible.
Make sure not to crush your hand when loosening
the screws.
WARNING
Risk of musculoskeletal damage from incorrect
setting!
The operator can sustain musculoskeletal damage
if failing to comply with the ergonomic requirements.
Adjust the working height to the body height of the
person who will operate the machine.
The working height is continuously adjustable between 750 and
900 mm (clearance between the floor and upper edge of the
tabletop).
Fig. 93: To adjust the working height:
(1) - Screws
Operating Instructions D887 e-con - 00.0 - 11/2023
Setup
①
Advertisement
Table of Contents
