Feeding Wheel Replacement - Dürkopp Adler 52 i Series Service Instructions Manual

10.6 Feeding wheel replacement

Important
If the rubber-coated feeding wheel is replaced with a toothed one or vice
versa, then the bottom end position must be set anew! ( p. 54)
Pic. 45: Feeding wheel replacement 1
(1) - Nut
(2) - Feeding wheel
1. Dismantle the nut (1).
2. Fix the shaft (3) at the other end with a screwdriver.
3. Replace the feeding wheel (2).
4. Mount and tighten the nut (1).
Pic. 46: Feeding wheel replacement 2
(1) - Screw
(2) - Washer
(3) - Lever
58
① ②
Beware of the left-handed threading!
① ② ③ ④
③
(3) - Shaft
⑤
⑥
(4) - Nut
(5) - Feeding wheels
(6) - Shaft
Service Instructions 52Xi, 52Xi-75 - 00.0 - 11/2021
Puller