Adjusting The Working Height - Dürkopp Adler 650-16 Operating Manual

Installation

11.7 Adjusting the working height

The working height is adjustable between 780 and 900 mm (mea-
sured to the upper edge of the table top).
Fig. 46: Adjusting the working height
1
1
(1) - Screws
Steps
1. Undo the screws (1) on the frame braces.
2. Adjust the table top horizontally to the required working height.
3. To avoid tilting, pull out, or push in, the table top evenly on both
sides.
4. Tighten the screws (1).
56 Instruction manual 650-16 Version 00.0 - 07/2013