Splitting A Conference Call; Bluetooth ® Calls - Avaya B199 Manual

Splitting a conference call

About this task
Use this procedure to split an ongoing conference call into several calls.
Before you begin
Start a conference call.
Procedure
On the phone screen, tap the Split icon.
The phone places all participants to separate calls and puts the calls on hold.
Next steps
• To resume the call with any one of the participants, tap the entry of the participant and then
the On Hold icon.
• To connect all the separate calls to the conference call, tap the Conference icon.
®
Bluetooth calls
You can use Avaya Conference Phone B199 to handle the phone calls coming to your mobile
device. This functionality is available when you pair the phone with your mobile device, and the
two devices are in a connected state.
B199 Conference Phone supports the following Bluetooth
• Answering a call
• Rejecting a call
• Ending a call
Note:
You can handle Bluetooth
phone does not support Bluetooth
Handling Bluetooth
When the phone is on a Bluetooth
accepting a Bluetooth
Ringtone
The ring signal you hear on B199 Conference Phone in case of an incoming Bluetooth
depends on specifications of the mobile Bluetooth
• If your mobile device supports in-band ringtone, B199 Conference Phone plays the signal it
receives from the connected Bluetooth
• If your mobile device does not support in-band ringtone, B199 Conference Phone plays its
local ringtone or remains silent depending on its Ring Level setting.
September 2021
®
calls only when B199 Conference Phone is in On-hook mode. The
®
calls in Off-hook mode during a SIP or USB call.
®
calls from B199 Conference Phone affects incoming SIP and USB calls.
®
call, it sends a busy signal to other incoming calls. Also,
®
call blocks any ongoing USB audio stream.
®
device.
Using Avaya Conference Phone B199
Comments on this document? infodev@avaya.com
®
call operations:
®
device. The options are as follows:
Bluetooth ® calls
®
call
27