Configure The Conference Codes; Connectivity Options - Avaya B159 Series User Manual

2.7 Configure the Conference Codes

To automate multiparty conferencing, the phone needs to be configured with codes that match those expected by the
telephone system to which it is connected. For example, by default IP Office systems use the system short code *47 to
let a user conference together their current and held calls.
In the actions below:
· To enter F, press the
· To backspace, press the
To set the phone's conference signalling settings:
1. Select > CONF GUIDE > SETTINGS.
2. At the ENQUIRY prompt, enter the command the telephone system uses to hold the current call and press OK.
For IP Office, enter F and press OK.
3. At the CONFERENCE prompt, enter the command the telephone system uses to conference your held and current
calls together and press OK. For IP Office, enter F*47 and press OK.
4. At the RETURN prompt, enter the command your telephone system uses to switch between calls and press OK.
For IP Office, enter F and press OK.

2.8 Connectivity Options

The phone can be connected to (make and receive calls) in several different ways. The default is to make and receive
calls via an analog connection to a telephone system such as IP Office.
To set the phones active connections:
1. Press the key.
2. Use the arrow buttons to select a connectivity option required. The options are:
· ANALOGUE = Analog telephone line.
· MOBILE = Mobile/DECT telephone.
· USB = Computer (VoIP). See
· ANALOGUE+USB = Analog telephone line+computer.
· MOBILE+USB = Mobile/DECT telephone+computer.
3. Press OK to confirm your choice.
B159 Series User Guide
IP Office™ Platform 10.0
button.
button.
VoIP Calls 21 for more details.
Comments on this document? infodev@avaya.com
Page 16
Issue 02a (06 November 2017)