Managing Voip Calls Through A Pc; Bluetooth ® Connection - Avaya B199 Manual

Connectivity
connection ensures better sound quality that can be manually adjusted in the appropriate
applications on the PC.
Before you begin
Prepare USB micro Type B receptacle for connection purposes.
Procedure
1. Use the USB cable to connect the phone and the computer.
The B199 Conference Phone screen shows that the USB is connected.
2. (Optional) Access the computer settings and select the phone as the audio device. The
computer operating system automatically selects the phone as a speaker and microphone.
3. (Optional) Restart the software to switch to the new audio device if the computer has
active software that is using built-in speakers of the computer.

Managing VoIP calls through a PC

About this task
Use this procedure to manage VoIP calls through a personal computer or a laptop. The phone
functions as a speaker and microphone for the PC.
If you receive an incoming VoIP call during an active USB call, the phone indicates the incoming
call with a ring tone and LEDs flashing.
Before you begin
• Turn on the PC.
• Connect B199 Conference Phone with the USB receptacle to the PC.
• Select B199 Conference Phone as the audio device in the computer settings.
• Run the VoIP software.
Procedure
1. In the VoIP software, select the contact to call.
2. Dial the number and talk to your contact.
3. End the call in the computer VoIP software.
The phone functions as a speaker for the computer.
®
Bluetooth connection
Avaya Conference Phone B199 can establish wireless communication over Bluetooth
devices equipped with Bluetooth
®
Bluetooth , you can use the phone as a speakerphone for call handling, or as an audio receiver
for audio streaming.
September 2021
®
connectivity, such as mobile phones, tablets, or computers. With
Using Avaya Conference Phone B199
Comments on this document? infodev@avaya.com
®
with
40