Led Status Indicators; Specifications - Avaya B199 Manual

Overview

LED status indicators

The LEDs on the phone indicate the status of a call, such as an incoming call, a call on hold, or a
call on mute, or the status of the phone. The LEDs emit bright red, green, and blue colors that are
visible over a distance to draw your attention to the phone status as required.
You can also press the status indicator LEDs to mute and unmute the phone.
LED color
Steady red
Flashing red
Steady green
Flashing green
Steady blue
Flashing blue
LEDs off

Specifications

The following table lists the specifications that Avaya Conference Phone B199 supports:
Name
Power
Connectivity
Screen
Acoustics
Music
September 2021
Description
Microphones are on mute.
A call is on hold. Microphones and the speaker are turned off.
A call is in progress.
An incoming call is ringing.
®
Active Bluetooth connection.
The phone is in Bluetooth
The phone is inactive.
Description
• PoE 802.3af
• PoE 802.3at
• PoE injector available as an accessory
• Ethernet RJ45 10/100 Mbps, PoE 802.3af, and PoE 802.3at
• USB 3.0 device
®
• Built-in Bluetooth LE and NFC
®
• Bluetooth Classic
• Daisy Chain (audio) ports (6-pin RJ-type)
Graphical touch screen with a resolution of approximately 480 x 800 and
size of 4.3"
• 3 symmetrically placed MEMS microphones
• Full range speaker in the sealed enclosure
• PoE 802.3at: 91 dB and bass boost
• PoE 802.3af: 87 dB
• Daisy Chain: 91 dB
Using Avaya Conference Phone B199
Comments on this document? infodev@avaya.com
®
pairing mode.
Table continues...
18