Light Switch; Cruise Control Buttons - KTM 1290 SUPER ADVENTURE R 2021 Owner's Manual

6 CONTROLS
6.5
6.6
The cruise control buttons
Possible states
• cruise control system button
mode is displayed in the combination instrument.
Button +RES pressed briefly – The last saved speed is reapplied. Every subsequent brief pressing increases
•
the target speed by 1 km/h or 1 mph.
Button +RES pressed and held – The target speed increases in increments of 5 km/h or 5 mph.
•
Button ‑SET pressed briefly – The cruise control system function is activated and the current speed is main-
•
tained. Every subsequent brief press reduces the target speed by 1 km/h or 1 mph.
Button ‑SET pressed and held – The target speed decreases in increments of 5 km/h or 5 mph.
•
16

Light switch

E02216-10

Cruise control buttons

1 2 3
, and
pressed briefly – Cruise control function is switched on or off. The operating
1
The light switch is fitted on the combination switch on the
left.
Possible states
Low beam on – Light switch in position
position, the low beam and the tail light are switched
on.
High beam on – Push the light switch to position
In this position, the high beam and the tail light are
switched on.
Headlight flasher – Push the light switch into posi-
C
tion .
of the are located on the left side of the combination switch.
A
. In this
B
E02327-10
.