Starting Off; Quickshifter + (Optional); Starting With Hhc (Optional) - KTM 1290 SUPER ADVENTURE R 2021 Owner's Manual

10 RIDING INSTRUCTIONS
10.3
–
Pull the clutch lever, engage 1st gear, release the clutch lever slowly and simultaneously open the throttle
carefully.
10.4
10.5
74

Starting off

Quickshifter + (optional)

H01989-10

Starting with HHC (optional)

402422-01
If the quickshifter + (optional) is activated, you can shift up and
down without actuating the clutch.
Because there is no need to close the throttle grip, uninterrupted
gear shifts are possible.
The quickshifter + uses the shifter shaft position to check whether
or not a shift should be initiated, and sends a corresponding signal
to the engine control.
If the quickshifter + is disabled in the combination instrument,
the clutch needs to be actuated in the normal way for each shift.
The HHC is an optional auxiliary function of the brake system.
The HHC prevents accidental rolling back of the motorcycle on
hills.
The HHC recognizes stopping on hills and operates the rear brake.
After releasing the brake lever, the brake force is maintained for
a maximum of 5 seconds as long as the motorcycle is not moving
forward.
When driving off the HHC releases the rear brake automatically.
Info
When the HHC is active, the TC indicator lamp flashes
When the ignition is switched on, the HHC can still be
active even if the engine is stopped.
To roll back with active HHC, wait 5 seconds, shift to neu-
tral, or switch off the ignition.
If the HHC does not detect a start off after 5 seconds, the braking
force is automatically reduced gently.
When a brake lever is actuated, the HHC is re-activated.