Installing The Rear Wheel - KTM 1290 SUPER ADVENTURE R 2021 Owner's Manual

15 WHEELS, TIRES
15.4
124
E02386-11
E02387-10
E02388-10

Installing the rear wheel

Warning
Danger of accidents Oil or grease on the brake discs reduces the braking effect.
–
Always keep the brake discs free of oil and grease.
–
Clean the brake discs with brake cleaner when necessary.
Warning
Danger of accidents There is no braking effect to start with at the rear brake after installing the rear
wheel.
–
Actuate the foot brake several times before going on a ride until you can feel a firm pressure point.
–
1
Remove screw and pull wheel speed sensor
hole.
–
3
Remove nut . Take off chain adjuster
–
5
Pull out wheel spindle
to be pushed forward.
–
Push the rear wheel forward as far as possible. Take the chain
off the rear sprocket and place it on chain sprocket guard
Warning
Danger of accidents Damaged brake discs reduce the
braking effect.
–
Always lay the wheel down in such a way that the
brake disc is not damaged.
–
Hold the rear wheel and remove the wheel spindle. Take the
rear wheel out of the link fork.
Info
Do not operate the foot brake when the rear wheel is
removed.
–
7
Remove spacer .
2
out of the
4
.
far enough to allow the rear wheel
6
.