19 SERVICE WORK ON THE ENGINE
146
Main work
–
Stand the motorcycle on a level surface using the side stand.
–
Position an appropriate container under the engine.
–
Remove oil drain plugs
rings, and the oil screens.
E02285-10
–
Remove screws
ring.
E02286-10
–
Pull oil filter
Lock ring plier (51012011000)
–
Allow the engine oil to drain completely.
–
Thoroughly clean the parts and the sealing surface.
E02287-10
–
Insert new oil filter
Info
Only insert the oil filter by hand.
–
Oil the O-ring of the oil filter cover. Mount oil filter cover
E02288-10
–
Mount and tighten screws
Guideline
Remaining engine
screws
E02286-11
1
along with the magnets, the O-
2
. Take off oil filter cover
4
out of the oil filter housing.
4
.
2
.
M5
3
with the O-
3
.
6 Nm (4.4 lbf ft)