Start Button; Horn Button; Light Switch - KTM Freeride E-XC 2019 Owner's Manual

6 CONTROLS
6.5
6.6
6.7
20

Start button

A00175-12

Horn button

A00176-10

Light switch

A00203-10
1
The start button is fitted on the right side of the handlebar.
The start button is only enabled when the main switch is switched
on.
When the start button is pushed, the vehicle switches from
standby to ready mode. The driving mode indicator and an
acoustic signal indicate operating readiness.
When the start button is pushed again, the vehicle switches back
to standby mode. The driving mode indicator goes out.
Info
Standby mode can only be switched to ready mode if the
throttle grip is fully closed and the vehicle speed is less
than 5 km/h. If the vehicle is not moved for 90 seconds
after ready mode is activated and the throttle grip is not
twisted open, the vehicle automatically switches back to
standby mode.
Possible states
The start button is in the neutral position – The state of the
•
vehicle is retained.
The start button is pressed – The state of the vehicle changes
•
between ready mode and standby mode.
1
The horn button is fitted on the left side of the handlebar.
Possible states
• Horn button in neutral position
pressed – The horn is operated in this posi-
• Horn button
tion.
1
The light switch is fitted on the left side of the handlebar.
Possible states
Low beam on – Light switch is in the central posi-
tion. In this position, the low beam and tail light are
switched on.
High beam on – Light switch is turned to the left.
In this position, the high beam and the tail light are
switched on.