Update Custom Language - Graco VRM 24F872 Instructions Manual

Appendix E - USB Operation

Update Custom Language

Use the following process to customize the text on the
ADM. The language file DISPTEXT.TXT can be modi-
fied in Excel but must be saved as a Unicode Text file
with the extension .TXT in order for it to properly import.
1. Insert a high-quality USB stick-drive into the ADM
USB port on the system with the settings to be
transferred. Once the download is complete the
DISPTEXT.TXT file will be located in the "DOWN-
LOAD" folder.
2. Plug the USB stick-drive into a computer.
3. Navigate to the DOWNLOAD folder.
4. Copy the DISPTEXT.TXT file from the DOWNLOAD
folder to your computer.
5. Use any data processing software such as Excel to
edit the DISPTEXT.TXT file.
a. In the first column, locate the string to change.
b. In the second column of the same row, enter the
new string.
c. Save the file as a Unicode Text file. The name
must remain "DISPTEXT.TXT".
6. Copy the edited DISPTEXT.TXT file into the
UPLOAD folder.
7. Remove the USB stick-drive from the computer and
insert it into the ADM USB port. The software will
automatically begin updating.
NOTE: Before the update begins the ADM automatically
shuts down the system, aborting any in-progress dis-
pensing. When the software is updating a pop-up box
will appear to inform the user of the update and the sys-
tem will lock. Once the update is complete the ADM will
tell the user to cycle power to apply the updates.
8. When the software is done updating, remove the
USB stick-drive.
9. Turn the Main Power Switch to the OFF position
then back to the ON position.
10. Plug the USB stick-drive into a computer.
11. Navigate to the UPLOAD folder and remove the
DISPTEXT.TXT file.
84
NOTE: Immediately following uploading the language
file, remove the DISPTEXT.TXT file from the UPLOAD
folder to prevent accidental loss of data the next time
the USB stick-drive is inserted into the ADM USB port. If
there is a DISPTEXT.TXT file in the UPLOAD folder
when the USB stick-drive is inserted into the ADM USB
the software will automatically begin updating.
313873J