Appendix D - Adm Event And Error Codes Overview; Event Codes - Graco VRM 24F872 Instructions Manual

Appendix D - ADM Event and Error Codes Overview

Event Codes

Event Code and
String Triggers
EAA0-R: Base Purge Base purge performed
EAD0-R: Pump(s) One or both pumps were parked
Parked
EA10-R: Red Pump The red pump has been primed
Prime
EA20-R: Blue Pump The blue pump has been primed
Prime
EA00-R: Disp. A dispense has occurred of the given
Occurred (Shot #) shot number.
EAR0-R: Night Mode While in night mode the system has
Recirc On automatically entered a low recircula-
tion mode and attempted to turn on all
enabled conditioning zones.
EB00-R: Stop Button The Red stop button was pressed on
Pressed the Advanced Display Module.
EBR0-R: Night Mode While in night mode the system has
Recirc Off automatically stopped the low recircu-
lation mode and turned off all condi-
tioning zones.
EBR1-R: Setup val- One or more of the setup values has
ues changed changed.
ECA1-R: Red Mate- The Red materials specific gravity was
rial SG Modified modified.
ECB2-R: Blue Mate- The Blue materials specific gravity was
rial SG Modified modified.
ECH0-R: Learn Mode A learn mode calibration was success-
Executed fully completed.
EC1X-R: Ratio Mon. User has changed one of the Ratio
Setup Changed Monitoring parameters on the Setup
System #3 screen.
EH00-R: Gel Timer The gel timer expired and the system
Dispense automatically took the gel shot.
EL00-R: System The System was powered on.
Powered On
EM00-R: System The System was powered off.
Powered Off
ENC1-R: Cal. Point 1 A value for the first point in the three
Weight Entered point calibration was entered.
ENC2-R: Cal. Point 2 A value for the second point in the
Weight Entered three point calibration was entered.
ENC4-R: Cal. Point 1 The running average for point one of
Weight Erased the three point calibration was erased.
ENC5-R: Cal. Point 2 The running average for point two of
Weight Erased the three point calibration was erased.
END0-R: Ratio Check A ratio check shot was dispensed from
Dispense the ratio check calibration screen.
313873J
Appendix D - ADM Event and Error Codes Overview
Event Code and
String Triggers
ENN0-R: Automatic The system was successfully charac-
Cal. Performed terized with the Automatic calibration.
EQU1-R: Settings The system settings were successfully
Downloaded transferred from the ADM to a USB
drive.
EQU2-R: Settings The system settings file was success-
Uploaded fully transferred from the USB drive to
the ADM.
EQU3-R: Language The custom language file was suc-
Downloaded cessfully transferred from the ADM to
a USB drive.
EQU4-R: Language The custom language file was suc-
Uploaded cessfully transferred from the USB
drive to the ADM.
EQU5-R: Logs Down- The Error/Event and Shot data logs
loaded were successfully transferred from the
ADM to a USB drive.
ER01-R: Shot Count A counter from the shot counters main-
Reset tenance page was erased
ER02-R: Seq. Posi- A counter from the sequence counters
tion Count Reset maintenance page was erased
ERA1-R: Red Mate- The resettable totalizer for the Red
rial Volume Reset material volume was reset to zero.
ERA2-R: Red Mate- The resettable totalizer for the Red
rial Weight Reset material weight was reset to zero.
ERA3-R: Red Cycle The resettable cycle counter for the
Count Reset Red pump was reset to zero.
ERB1-R: Blue Mate- The resettable totalizer for the Blue
rial Volume Reset material volume was reset to zero.
ERB2-R: Blue Mate- The resettable totalizer for the Blue
rial Weight Reset material weight was reset to zero.
ERB3-R: Blue Cycle The resettable cycle counter for the
Count Reset Blue pump was reset to zero.
69