Avaya 5900 Series Installing Manual page 38

Switch installation
Note:
Avaya does not supply the bolts used to secure the switch to the rack. Ensure you obtain the
appropriate bolts to secure the switch to your specific rack before you begin.
Procedure
1. Ensure power is disconnected from the switch.
2. Attach a bracket to each side of the switch with the included screws.
You have different options for front and rear mounting positions. Attach the brackets in the
best position for your specific equipment rack.
Figure 13: Front-mounted rack bracket installation
September 2017 Installing Avaya ERS 5900 Series
Comments on this document? infodev@avaya.com
38