Avaya 5900 Series Installing Manual page 13

• One rear mounted Base Select Switch
• Support for two field replaceable power supply units
Note:
ERS 59100GTS and ERS 59100GTS-PWR+ support four field replaceable power supply
units.
• One Kensington Lock slot located on the left side, near the back end of the chassis
• Two QSFP+ style stacking ports each supporting 42 Gbps of bidirectional traffic
• Status LED display panel
• One USB 2.1 Type A port
• One micro-USB 2.1 Type B port (reserved)
• Two 10/100/1000 Mbps copper ports (diagnostic use only)
The following figure shows the front panel of the 5952GTS switch.
1. Console port
2. USB 2.1 Type-A port
3. LED display
The following figure shows the rear panel of the 5952GTS switch.
1. Diagnostic ports (SDN port (labelled as AUX cannot be enabled) and
out-of-band management port)
2. Fan tray units
3. Power supply units
4. Base Unit switch
5. QSFP ports for stacking
September 2017 Installing Avaya ERS 5900 Series
Comments on this document? infodev@avaya.com
Ethernet Routing Switch 5900 series models
13