Figure 20: Install ERS 5900 switch in rack using front rack mounts
4. Attach the rear mounting brackets and secure the switch to the rear rack posts.
a. Slide a rear mounting bracket into each guide bracket channel until flush with the rear
rack posts.
b. Secure the rear mounting brackets to the switch chassis with the pan-head screws.
Figure 21: Attach ERS 5900 switch rear mounting brackets
You can proceed with the installation by connecting power and network connections to the
switch.
Single and multiple switch arrangements
This module describes standalone and stacked arrangements.
September 2017
Installing Avaya ERS 5900 Series
Comments on this document? infodev@avaya.com
Single and multiple switch arrangements
45