13
13.2
Making sample set for checking results: Proof copy
Use Proof copy to produce a sample of the copied set before making multiple copies. This is a convenient
and cost effective way of viewing results of the copying selections.
0
Proof copy is available when using ADF, or when using Separate Scan mode for more than 100 sheets
of original or originals to be scanned from original glass.
1
Position the original, then select the desired copy conditions on the Copy Screen.
–
Or, use Separate Scan mode to scan all originals.
2
Press [Proof Copy] on the control panel.
A sample copy will be output while scanning originals in the
ADF.
If Separate Scan mode has been used, a sample set will be
delivered immediately.
3
Check the sample copy for specified copy conditions.
–
Some conditions can be changed from the Copy Screen. See page 13-3 for details.
4
Change the settings or print quantity, as required, then press
[Start].
–
If the desired selection cannot be changed, press [Reset]
to delete all the data in memory and restart the job setting.
13-6
Advanced information
CS665 Pro