Using Paper Not Specified To Any Tray: Paper Setting - Oce CS665 Pro User Manual

Basic job settings
2
Touch to deselect [Rotation Off] to resume this function.
When Rotation is resumed, the Rotation icon will be displayed on the screen.
9.6.3

Using paper not specified to any tray: Paper setting

Each paper tray has been preset with paper size and other specifications.
If you want to use another paper than any loaded in the trays, follow the procedure below to temporarily
change the setting of the tray to be used.
When starting a job after a setting change has been made in paper type (e.g. from Normal to Coated-GL), it
may take a certain period of time before copying operation becomes available due to the fixing temperature
adjustment.
1
On the Copy Screen, check the tray setting for each tray.
– Each key displays paper size, weight, type/name, and paper amount remaining in the tray.
– The paper name will be displayed only when the same paper size as that in registered specifications
is loaded.
2
Load copy paper into the tray with the setting change made.
– The changed setting will not be cleared when copying job is completed using that tray.
3
Touch [Paper Setting].
– The same setting is available from the [Paper Setting] keys on both Copy Screen and Machine
Status Screen.
The Paper Setting Screen will be displayed.
CS665 Pro
9
9-33