Troubleshooting
5.2
If paste pellets stick inside paste hopper
If paste pellets stick inside the paste hopper, the message "Paste pellet is stopped up, open paste hopper
cover of P. B. and follow a guide" will be displayed. Follow the procedure below for recovery.
To clear the stuck paste pellets
1
Open the paste hopper cover.
2
Raise the pellet stacking correction lever.
3
Push in the pellet stacking correction lever and then draw it
out just one time.
–
Do not repeat this action, otherwise machine trouble may
be caused due to a heavy supply of paste pellets.
4
Return the pellet stacking correction lever to its original
position.
CS665 Pro
5
5-5