Output applications
12.4.1
Punching file holes in copies
Copies will be punched in this mode. Follow the procedure below to select 2- or 4-hole punch and punch
position.
!
Detail
For detailed specifications, see page 3-3 and page 7-7.
1
Position the original.
2
Touch [Punch] on the Copy Screen.
–
Punched sheets will be delivered to the primary (main) tray. The Output Application icon shows the
number of punch holes and punch position currently selected.
–
If you want to change the number of punch holes and punch position, proceed to the following
steps.
3
Touch [Output Appli.] on the Copy Screen.
The Output Application Screen will be displayed.
4
Touch [Hole-Punch].
The Hole-Punch Screen will be displayed.
CS665 Pro
12
12-15