Selecting Paper Size Automatically: Auto Paper Select - Oce CS665 Pro User Manual

Basic job settings
9.6.1

Selecting paper size automatically: Auto paper select

Auto Paper Select detects the original size placed on the ADF or original glass and automatically selects and
feeds copy paper of the same size (e1.0 magnification mode), or selects an appropriate size according to the
magnification ratio selected (Zoom mode).
!
Detail
The original sizes to be detected from the ADF or original glass are previously determined. See
page 3-13 for details.
The original sizes to be detected from the ADF or original glass can be changed. See the User's guide
– POD Administrator's reference.
The machine manager can designate the tray or paper condition incompatible with Auto Paper Select.
See the User's guide – POD Administrator's reference.
The machine can be set to deactivate Auto Paper Select when original is set in the ADF or on the original
glass.
0 Auto Paper Select is incompatible with Auto Zoom, while Rotation is available.
0 Auto Paper Select will not select the tray of the size specified as Custom.
1
Press [Reset] on the control panel. If the machine is equipped with the ADF, close it securely before
pressing [Reset].
– [Auto Paper Select] is initially selected on the Copy Screen.
2
Position the original.
– The tray loaded with an appropriate paper size will be selected automatically.
Or, a message will be prompt you that the appropriate size cannot be found in any tray. In this case,
load the paper of the size referred in the message.
Reminder
Auto Paper Select may not function for the tray of selected size due to the paper specifications
registered for that tray.
CS665 Pro
9
9-31