Supplies & handling
4.10
Removing finished sets from Large capacity stacker LS-505
The Large capacity stacker LS-505 can hold 5,000 output sheets (3,000 sheets for coated paper of Max.
331 mm e 483 mm to Min. 210 mm e 380 mm / 2,000 sheets for B5 and A5) at maximum.
Follow the procedure below to take out paper from the stacker.
Note
The paper stopper is provided to secure the paper in position when moving the carriage.
To remove finished sets
1
Press the Paper removal button.
The stacker unit will move down to the carriage.
2
Open the large capacity stacker door.
–
Once the stacker holds a sheet of output paper, the large
capacity stacker door will be locked and cannot open till
the stacker unit goes down fully to the carriage.
3
Withdraw the carriage by holding its handle.
–
Be sure to withdraw the carriage straightforward, and do
not change the direction forcibly while driving it.
4
Remove the sheets from the carriage.
The stacker unit can be removed from the carriage.
CS665 Pro
4
4-45